Our website does NOT support Internet Explorer, please use a newer browser such as Chrome/Edge/Firefox. You can continue using our website with Internet explorer but you will not get the same modern appearance as if you were using a newer browser.
Getting Started With OSCA 2.0
If you have just purchased the OSCA 2.0 and it's still in its shiny new box then this guide is for you! We will guide you through everything you need to know to get you started.
Step 1: Screw the OBD cable into the OSCA device
Inside your box, you will find a T10 screwdriver along with an OBD cable and MDI device. Please use the screwdriver to attach the two together in the designated slot.
Step 2: Connect OSCA 2.0 to your network
You are now ready to see the power of the OSCA! Connect your OSCA 2.0 to the OBD port in a vehicle to power the device up. You can now follow the 'Connecting your OSCA 2.0 to WiFi guide' within our guide section.
