Our website does NOT support Internet Explorer, please use a newer browser such as Chrome/Edge/Firefox. You can continue using our website with Internet explorer but you will not get the same modern appearance as if you were using a newer browser.

Connecting OSCA 2.0 direct to router via ethernet

Connecting OSCA 2.0 directly to your router couldn't be easier! Think of OSCA 2.0 cable as you computer, connect an ethernet cable from your router directly into the network port! Follow our guide to see just how easy it is.

Help Guides/Connecting OSCA 2.0 direct to router via ethernet

Step 1: Connect your OSCA 2.0 into the Vehicles OBD Port

The OSCA 2.0 cable needs to be plugged into an OBD port of a vehicle. Once connected the OSCA cable will proceed to start up.

Reset Step 1

Step 2: Connect your OSCA 2.0 to your router

If you are not connecting your OSCA 2.0 to wifi this step couldn't be easier! Think of OSCA as your computer, connect an ethernet cable from your router directly into the network port on your cable. Once it generates an IP on your network your device is ready to connect to!

Gif Less Frames

Step 3: Go to https://osca.obd.help

You can now direct your web browser to https://osca.obd.help from any device. You will be presented with a login screen, please log in with the details provided in the welcome email. Then enter the cable serial number, located on the white sticker on the underside of the cable to connect to our team.

Web App Step 2
Back To Our Guides